|
|
|
|
 |
| The FSBCs for the Porsche 911s A and S calipers. |
 |
 |
 |
 |
| A set of 2.40 3.10 13D 1.13s used with a 17" aftermarket wheel are pictured. For a 15" Fuchs wheel (shown bottom right), a 2.40 3.10 13D 1.00 (inside of caliper) and a 2.40 3.1013D 0.88S (outside of caliper) are required. For a 16" Fuchs wheel, a 2.40 3.10 13D 1.13 (inside of caliper) and a 2.40 3.1013D 0.88S (outside of caliper) will fit. Download the fitment cutouts to check clearances. |
 |
| The FSBCs are available for Army HMMWV |
 |
 |
|
A set of FSBCs are installed on a HMMWV caliper.After manufacturing, the copper components are plated with electroless nickel to prevent oxidation. The inboard location of the brake calipers on the Army HMMWVs allows for extremely large coolers.
|
 |
| The FSBCs are available for select years of Toyota Tacoma, 4Runner, Landcruiser and Nissan 300ZX. |
 |
 |
| A set of 2.00 4.70 14D 1.25s installed in a 1995 Toyota Tacoma caliper are pictured. The FSBCs installed in the Tacoma caliper are for use with a 17" wheel. For a 16" wheel (not shown), a 2.00 4.70 14D 1.25 (inside caliper) and a 2.00 4.70 14D 0.88 (outside caliper) will fit. Download the fitment cutouts to check clearances. |
 |
| The FSBCs for the 240, 260 and 280 Z Cars are available. |
 |
 |
 |
 |
| A set of 2.30 3.10 13D 1.13s used with a 16" wheel are pictured above. For installation on a 15" wheel (shown bottom right), a 2.30 3.10 13D 1.13 (inside caliper) and a 2.30 3.10 13D 1.00 (outside caliper) will fit. Download the fitment cutouts to check clearances.. |
|
| |
|
|
